17 F550 169″ 4×4 with a Model 866 Continuous Sewer Rodder

Wayne Bentley Medium Duty

17 F550 169" 4x4 with a Model 866 Continuous Sewer Rodder

17 F550 169″ 4×4 with a Model 866 Continuous Sewer Rodder

Arrow Board and rear operator deck

Arrow Board and rear operator deck

Access deck and vac tube holders

Access deck and vac tube holders

17 F550 169" 4x4 with a Model 866 Continuous Sewer Rodder

17 F550 169″ 4×4 with a Model 866 Continuous Sewer Rodder

Wheel chock storage

Wheel chock storage

Operator controls

Operator controls

Tool Box

Maintenance deck steps

Yoke

Yoke

Only at Tate’s will you find a 17 F550 169″ 4×4 with a Model 866 Continuous Sewer Rodder. The chassis is the all new 2017 Ford F550 4×4 Regular cab 169″ WB / 84″CA chassis which features an all aluminum cab and a new rigid fully boxed frame. The chassis is equipped with Fords tried and true 6.8L 3V V-10 gasoline engine and now 2017 model year the awesome 6R140 6-spd transmission with PTO port. Additional equipment includes Payload Plus package 19,500 GVWR, 4.88 limited slip axle, spare tire and wheel, cloth 40/20/40 seating and Low deflection package.

AWI of Phoenix provided the upfit of this Model 866 Rodder which has some pretty thoughtful features, first and foremost is the chain driven Yoke, It is the most balanced and concentric yoke available. When you look in the housing which has dual side access doors that lock you will note that for a truck mounted application they just didn’t set it on a flatbed……it is open to the ground. This allows moisture and stuff to go to ground instead of corroding a bed. They also provide a deck all the way around with non slip tape and fold out steps to access the decks. Furthermore all of the yoke access doors feature a stop switch when opened, the yoke will not rotate when they are open. The operators deck has a guard rail and super easy big controls which are wired to NEMA codes. For workman safety the back of the one piece yoke enclosure features an arrow board and up top a beacon. The 866 comes standard with 1200′ of .375 rod, dual lever hydraulic controls, three 36″ lockable toolboxes, 25′ hose guide, two assembly wrenches, wheel chock pockets and this one it features the optional cone holder

This is a very very clean design and well executed! Let us spec one for you today! Check out the window sticker and brochure below.

FLT329 Window Sticker

Rodder_Series_Brochure_(Small)

The following two tabs change content below.
Please contact me by email at wayne.bentley@tatesautocenter.com or by phone at (928) 240-2624 for more information on this vehicle.

Latest posts by Wayne Bentley (see all)